Aircrack-ng is an 802.11 WEP and WPA-PSK keys cracking program that can recover keys once enough data packets have been captured.
It implements the standard FMS attack along with some optimizations like KoreK attacks, as well as the all-new PTW attack, thus making the attack much faster compared to other WEP cracking tools.
With the help a these commands you will be able to crack WPA/WPA2 Wi-Fi Access Points which use PSK (Pre-Shared Key) encryption.
The objective is to capture the WPA/WPA2 authentication handshake and then crack the PSK using aircrack-ng.
Here are the basic steps we will be going through:
Start Kali Linux and login, preferably as root.
Disconnect from all wireless networks, open a Terminal, and type airmon-ng
This will list all of the wireless cards that support monitor (not injection) mode. If no cards are listed, try disconnecting and reconnecting the adapter (if you’re using one) and check that it supports monitor mode.
You can see here that my card supports monitor mode and that it’s listed as wlan0.
Type airmon-ng start followed by the interface name of your wireless card. mine is wlan0,
so my command would be: airmon-ng start wlan0
The “(monitor mode enabled)” message means that the card has successfully been put into monitor mode. Note the name of the new monitor interface, mon0.
This disables the wireless card from connecting to the internet, allowing it to focus on monitor mode instead.
After you have disabled mon0 (completed the wireless section of the tutorial), you’ll need to enable wlan0 (or name of wireless interface), by typing: ifconfig [interface of wireless card] up and pressing Enter.
Type airodump-ng followed by the name of the new monitor interface, which is probably mon0.
If you receive a “fixed channel –1” error, see the above NOTE
Airodump will now list all of the wireless networks in your area, and a lot of useful information about them.
Locate your network or the network that you have permission to penetration test.
Once you’ve spotted your network on the ever-populating list, hit Ctrl + C on your keyboard to stop the process. Note the channel of your target network.
Copy the BSSID of the target network
Now type this command:
Replace [channel] with the channel of your target network. Paste the network BSSID where [bssid] is, and replace [monitor interface] with the name of your monitor-enabled interface, (mon0).
The “–w” and file path command specifies a place where airodump will save any intercepted 4-way handshakes (necessary to crack the password). Here we saved it to the Desktop, but you can save it anywhere.
A complete command should look similar this:
Now press enter.
Airodump with now monitor only the target network, allowing us to capture more specific information about it.
What we’re really doing now is waiting for a device to connect or reconnect to the network, forcing the router to send out the four-way handshake that we need to capture in order to crack the password.
Also, four files should show up on your desktop, this is where the handshake will be saved when captured, so don’t delete them!
But we’re not really going to wait for a device to connect, no, that’s not what impatient hackers do.
We’re actually going to use another cool-tool that belongs to the aircrack suite called aireplay-ng, to speed up the process.
Instead of waiting for a device to connect, hackers can use this tool to force a device to reconnect by sending deauthentication (deauth) packets to one of the networks devices, making it think that it has to reconnect with the network.
in order for this tool to work, there has to be someone else connected to the network first, so watch the airodump-ng and wait for a client to show up. It might take a long time, or it might only take a second before the first one shows.
If none show up after a lengthy wait, then the network might be empty right now, or you’re to far away from the network.
Leave airodump-ng running and open a second terminal. In this terminal, type this command:
aireplay-ng –0 2 –a [router bssid] –c [client bssid] mon0
My complete command looks like this:
aireplay-ng –0 2 –a 00:14:BF:E0:E8:D5 –c 4C:EB:42:59:DE:31 mon0
Upon hitting Enter, you’ll see aireplay-ng send the packets.
If you were close enough to the target client, and the deauthentication process works, this message will appear on the airodump screen (which you left open):
This means that the handshake has been captured, the password is in the hacker’s hands, in some form or another.
You can close the aireplay-ng terminal and hit Ctrl + C on the airodump-ng terminal to stop monitoring the network, but don’t close it yet just incase you need some of the information later.
This concludes the external part of this tutorial.
Open a new Terminal, and type in this command:
aircrack-ng -a2 -b [router bssid] -w [path to wordlist] /root/Desktop/*.cap
My complete command looks like this:
aircrack-ng –a2 –b 00:14:BF:E0:E8:D5 –w /root/wpa.txt /root/Desktop/*.cap
Aircrack-ng will now launch into the process of cracking the password.
crack it if the password happens to be in the wordlist that you’ve selected. Sometimes, it’s not.
If this is the case, you can try other wordlists.
If you simply cannot find the password no matter how many wordlists you try, then it appears your penetration test has failed, and the network is at least safe from basic brute-force attacks.
If the phrase is in the wordlist, then aircrack-ng will show it too you like this:
The passphrase to our test-network was “notsecure,” and you can see here that it was in the wordlist, and aircrack found it.
If you find the password without a decent struggle, then change your password, if it’s your network. If you’re penetration testing for someone, then tell them to change their password as soon as possible.
There has recently been a discovery made by IBM Security X-Force Threat Researchers regarding a…
Web Application Pentesting is a method of identifying, analyzing and Report the vulnerabilities which are…
In order to steal cryptocurrency and clipboard contents, ViperSoftX was detected by the security analysts…
There is a collection of IOCs from VirusTotal and YARA Rules that has been recently…
Security researchers at Cyble recently identified that the authors of ransomware now have access to…
An extensive phishing campaign targeting businesses in numerous upright markets, including retail, was discovered by…